APPLICATION:
“Sprinkle a small circle of 5 EXTRA on the floor. With water solution tank control, apply water to the floor. Add 5 EXTRA or water if necessary.
If a water solution tank is not used, wet a small area with clean water and sprinkle 5 EXTRA. Turn on the floor burnisher and work water and 5 EXTRA into slurry.
[Note: use of a 175rpm floor burnisher (min weight 100lbs) with solution tank, shower feed and driver and 17inches red floor maintenance pad is required]Work areas of no more than 15 – 20ft² at a time. Do not allow the slurry to dry on the floor at anytime. After running the area 3 or 4 times, vacuum away the residue to check the result. Buff to rinse the floor using dilution of LEM-3 in water using 1:10 ratio. Wipe with a dry cloth.”
Safety Data Sheet
