DESCRIPTION: The powder is used to improve the shining and to maintain the shine on new as well as old ceramic tiles floors.
APPLICATION: Sprinkle the P218 powder on a 4 square metres area at a time.
Apply a little water manually and start working with the floor burnisher.
Note: use a slow speed (175Rpm) heavy weight floor burnisher weighing at least 50kgs and above fitted with φ 400mm nylon or felt pad. Add P218 powder or water as it is necessary to maintain watery slurry. The rotating of the machine may cause splattering so take care to protect adjoining areas of carpet, wood, skirting and walls.
Slowly work areas of no more than 2–3 square metres with several passages then pull the slurry across the surface with a squeegee to check the results. When the desired polish has been achieved in that area, move the slurry to the next floor area to be treated. Wash the floor with clean water and make sure all powder slurry is removed from all surfaces and joints. When the floor is dry, buff with clean, dry, white nylon pad.
